Errata: Example 8.10 missing factor of v, a1 and a2 flipped

Chapter	Output Feedback
Page	8-28
Line	-4
Version	3.1.5
Date	6 Oct 2021

Example 8.10 (Steering control with velocity scheduling) is missing a factor of $v$ in the definition of $A_{\text{d}}$ that propagates through the example. In addition, the coefficients $a_{1}$ and $a_{2}$ are swapped in the definition of $w_{2}$.

The equation for $A_{\text{d}}$ should read:

$A_{\text{d}}=\left.{\frac {\partial f}{\partial x}}\right|_{(x_{\text{d}},u_{\text{d}})}=\left.{\begin{bmatrix}0&0&-{\color {blue}v}\sin \theta \\0&0&{\color {blue}v}\cos \theta \\0&0&0\end{bmatrix}}\right|_{(x_{\text{d}},u_{\text{d}})}={\begin{bmatrix}0&0&0\\0&0&v_{\text{r}}\\0&0&0\end{bmatrix}},$

This leads to an error in the definition of $w_{2}$ later in the example. In addition, the coefficients $a_{1}$ and $a_{2}$ are swapped, so the definition of $w_{2}$ should be:

$w_{2}=-{\frac {l}{v_{\text{r}}}}({\frac {a_{2}}{v_{\text{r}}}}e_{y}+a_{1}e_{\theta }).$

The final controller then becomes

${\begin{bmatrix}v\\\phi \end{bmatrix}}=-{\begin{bmatrix}\lambda _{1}&0&0\\0&{\dfrac {a_{2}l}{v_{\text{r}}^{2}}}&{\dfrac {a_{1}l}{v_{\text{r}}}}\end{bmatrix}}$